Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain, durable and uPVC window repair long-lasting. As opposed to aluminium and timber they do not corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is important to ensure that your windows are in good working order.

For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it will be difficult to remove and replace the old panes. In this instance you'll need to find some plastic spacers that assist the new pane to fit correctly into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor which could cause them to be trampled.

Once the glass is removed from the window, it's best to cover the gap with packaging tape or duct tape to block water and drafts from entering the property until a professional can come out and repair the window repairs. It also acts as a barrier that will prevent any intruders from getting access into your home. If the distance between the window and the door is significant, you may need to consider an alarm system that has windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. However, over time they can suffer from a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from getting worse.

Repositioning the hinges can help fix a window that is sagging. First, you'll need to open the windows to get at the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you're satisfied with the fit, tighten the screws until they remain in the right place.

If you can't reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loose their elasticity. If this happens, it's crucial to replace the seal as quickly as possible to ensure your upvc Window repair windows are watertight and safe from drafts.

uPVC handles may also loosen. The majority of the time it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. The first step is to close your window repairs and do a test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is important to take action if you awake each day to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on how serious the problem is, the old caulking may need to be removed. When it comes to uPVC repair, you must avoid over-caulking. This will only make your window more difficult to clean and lower its energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. This can be easily corrected by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it opens with a breeze. They can be easily repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. It is very easy to replace a hinge on a window, but it's easier if someone helps you to hold the frame.

Check that the uPVC hinges are closed and open in the right direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should open.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular way or by poor installation at the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be more than happy to give you suggestions.

It is also important to grease the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the chance of windows sticking and prevent corrosion. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. First, the hinges because of wear and tear, could become misaligned. This will cause gaps to develop where the sash joins the frame. This can be easily repaired by giving them a good clean, but when they're beyond repair, it might be necessary to have them realigned or replaced. Second, the interlock can be misaligned. This happens on the hinge side and might require to be cleaned. In some instances it might be necessary to replace the hinges.

These seals can wear down or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures, and upvc window repair also lessen the risk of draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are typically fabric tubes that are filled with some kind of filler. They can be positioned on the top of your windowsill. They will keep your home warm by blocking cold air.

The windows made of upvc can keep providing excellent insulation and security for your home by performing regular maintenance and repairs. However, it is important to recognize that windows last for a certain period of time and there may come a point where it is more efficient to replace them than repair them. If you encounter any issues with your Upvc window you should consult an expert as soon as you can.