Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will save you from unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. It is essential to take the time to ensure that you are doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames of the past easily. However when you have double glazed window repairs pane windows that are held in place by internal beading, it will be more difficult to remove the existing panes and install new ones. In this case, you will need to locate some plastic spacers that will aid the new pane in being able to fit properly into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you start working on the glass, so that any shards fall onto the fabric rather than on the floor, where they could be trodden under and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and fix the window. This will also act as a barrier, Window Repairs preventing any intruders from gaining entry into your home. If the gap between the door and the window is large, you might need to consider a security screen that also includes windows. This will provide the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time, they may be afflicted by a variety of problems including sagging. A sagging window in uPVC can cause issues with light, draughts, and even security. It's crucial to act when you notice your uPVC windows are sliding.

To fix a sagging window you can try repositioning the hinges. To do this, you'll need open the window to access the frame. Then, using a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and test it for an appropriate fit. If you're satisfied with the fit of your window, tighten the screws to keep them in the right position.

If you are unable to move the hinges, you could have to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's essential to replace the seal as quickly as possible so that your uPVC windows are waterproof and secure from draughts.

UPVC handles can also loosen. Often it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. First, you'll need to shut the window and perform an initial fitting. The corner joints of the sash need to align with the casing joint. If it isn't then you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's crucial to take action. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or is missing.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on how severe the issue is, old caulking may have to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage.

Check that any drainage holes do not have debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double glazed window repairs-glazed glass it is more likely that the problem is with the seal than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens in the breeze. Any competent DIYer can replace hinges in just a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. It's very simple to change a window hinge but it's much easier if someone else helps you hold the frame.

Check that the uPVC hinges open and close in the proper direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or by a poor installation in the factory. Sending us a picture via our website will often solve the issue. We are happy to offer advice.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. The hinges can also become misaligned due to wear, which can cause an opening where the sash meets frame. If they are beyond repair, it may be required to realign them. Secondly the interlock, this is on the hinge side of the window and can also be misaligned, and again it's possible to just give them a clean but in some instances it could be necessary to have these replaced.

These seals can wear down or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures and lessen the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security for your home with regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it may be more cost-effective to replace them rather than repair them. If you encounter any issues with your upvc window, it's best to consult an expert as soon as you can.